| Stauble Machine & Tool Co., Inc. | |
| Press Specification Sheet | |
| Press | Press # |
| 110 Ton Clearing | SD5029 |
| Model # | Serial # |
| S-2110-48T | 52-17388 |
| Date: | |
| 1952 | |
| Min. Shut Height Over Bolster | 9.75 |
| Max. Shut Height Over Bolster | 15.75 |
| Bolster Thickness | 4.5 |
| Ram Adjustment | 6 |
| Press Stroke | 8 |
| Strokes Per Minute | 34 |
| Press Cushion Travel | 3 |
| Press Cushion Max. Rating | 18 Ton @ 90 psi |
| Bolster Length: Left to Right | 48 |
| Bolster Width: Front to Back | 36 |
| Slide Length: Left to Right | 48 |
| Slide Width: Front to Back | 36 |
| Distance Between Gibs (s.s.) | 49 |
| Upright Opening (s.s.) Front to Back | N/A |
| Upright Opening (s.s.) Top to Bottom | N/A |
| Bolster to Bottom of Upright Opening (s.s.) | N/A |
| Slide Center to Throat (O.B.I.) | N/A |
| Width of Throat Opening (O.B.I.) | N/A |
| Scrap Opening - Bolster: Left to Right | 48 |
| Scrap Opening - Bolster: Front to Back | N/A |
| Direction of Tee Slots - Bolster | L - R |
| Direction of Tee Slots - Slide | F - B |
| Center of Bolster / Slide to Center Tee Slot | On Center 12" (Will Be Changing) |
| Distance Between Tee Slots | Bolster - 6" Slide - 12" |
| Tee Slot Width (Max. screw size) | 3/4-10 |
| Coil Stock / Part Feed Direction | F - B |
| Positive Knockout | Yes |
| Air Pin & Pattern | 1 1/2 Dia. 6" Centers 3" Off Center |
| Additional Comments: | |
| Press Location | Stauble - Dytisa de Mexico Plant |