| Stauble Machine & Tool Co., Inc. | |
| Press Specification Sheet | |
| Press | Press # |
| 200 Ton Clearing | SD5011 |
| Model # | Serial # |
| F-1200-36 | 42-6011 |
| Date: | |
| Min. Shut Height Over Bolster | 12.50 |
| Max. Shut Height Over Bolster | 16.50 |
| Bolster Thickness | 4 |
| Ram Adjustment | 4 |
| Press Stroke | 14 |
| Strokes Per Minute | 36 |
| Press Cushion Travel | N/A |
| Press Cushion Max. Rating | N/A |
| Bolster Length: Left to Right | 36 |
| Bolster Width: Front to Back | 36 |
| Slide Length: Left to Right | 36 |
| Slide Width: Front to Back | 36 |
| Distance Between Gibs (s.s.) | 32 |
| Upright Opening (s.s.) Front to Back | 12 |
| Upright Opening (s.s.) Top to Bottom | 6 |
| Bolster to Bottom of Upright Opening (s.s.) | 10.5" Above Bolster |
| Slide Center to Throat (O.B.I.) | N/A |
| Width of Throat Opening (O.B.I.) | N/A |
| Scrap Opening - Bolster: Left to Right | 38 |
| Scrap Opening - Bolster: Front to Back | N/A |
| Direction of Tee Slots - Bolster | F - B |
| Direction of Tee Slots - Slide | F - B (4) 6" - 12" - 6" |
| Center of Bolster / Slide to Center Tee Slot | On Center 4" - 4" - 4" - 4" - 4" - 4" |
| Distance Between Tee Slots | 4 |
| Tee Slot Width (Max. screw size) | 3/4-10 |
| Coil Stock / Part Feed Direction | F - B |
| Positive Knockout | Yes |
| Air Pin & Pattern | N/A |
| Additional Comments: | |
| Recommended Pass Line | 6" To 12" - Set At 8.50" |
| Press Location | Stauble - Dytisa de Mexico Plant |