| Stauble Machine & Tool Co., Inc. | |
| Press Specification Sheet | |
| Press | Press # |
| 250 Ton Cleveland | SD5000 |
| Model # | Serial # |
| S2-250-72-54 | 10247-2 |
| Date: | |
| 1954 | |
| Min. Shut Height Over Bolster | 19.625 |
| Max. Shut Height Over Bolster | 24.250 |
| Bolster Thickness | 6.50 |
| Ram Adjustment | 4.625 |
| Press Stroke | 12 |
| Strokes Per Minute | 18 |
| Press Cushion Travel | N/A |
| Press Cushion Max. Rating | N/A |
| Bolster Length: Left to Right | 72 |
| Bolster Width: Front to Back | 54 |
| Slide Length: Left to Right | 72 |
| Slide Width: Front to Back | 54 |
| Distance Between Gibs (s.s.) | 73 |
| Upright Opening (s.s.) Front to Back | 38 |
| Upright Opening (s.s.) Top to Bottom | 11 |
| Bolster to Bottom of Upright Opening (s.s.) | 0 |
| Slide Center to Throat (O.B.I.) | N/A |
| Width of Throat Opening (O.B.I.) | N/A |
| Scrap Opening - Bolster: Left to Right | N/A |
| Scrap Opening - Bolster: Front to Back | N/A |
| Direction of Tee Slots - Bolster | F - B |
| Direction of Tee Slots - Slide | F - B |
| Center of Bolster / Slide to Center Tee Slot | On Center |
| Distance Between Tee Slots | 6 |
| Tee Slot Width (Max. screw size) | 1 1/16" |
| Coil Stock / Part Feed Direction | R - L |
| Positive Knockout | No |
| Air Pin & Pattern | N/A |
| Additional Comments: | QDC Locating Pins - 6" Centers 3" Off |
| Center And 4 1/2" Off Of Front | |
| Recommended Pass Line | 12" To 16" - Set At 14 1/2" |
| Press Location | Stauble - Dytisa de Mexico Plant |